Pilot RC 40% Extra 330SC

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Pilot RC 40% Extra 330SC

Postby Joe Hunt » Tue Oct 20, 2015 8:28 pm

The plane arrived!

* The wings weigh 3-lbs 10-oz each.
* The landing gear weighs 0-oz, haha, it's crazy light... just 11-oz.
* It's all hinged up, but not gap sealed.
* The pushrods are titanium and the balljoints are already on them.
* The control horns are fiberglass and are ready to be glued in.
* The fuel tank is plumbed, mounted, and has fuel line running to the engine area and T'd off for the fill line.
* A Desert Aircraft style fuel dot is included.
* A carbon fiber spinner painted to match the plane is included.
* Extension connector plastic keepers are included.
* Spoke'd wheels and big fancy wheel pants are included.
* The rudder is as big as a kitchen cabinet door (I love it).
* Ailerons are going to be more than enough for me.
* Elevators might be plenty for me, too.
* The pull/pull cables come assembled and ready to install.

That's what I've noticed so far.

Oh, and the two boxes were delivered in perfect condition and the plane and all parts were in perfect condition.

The workmanship and quality are great, just like the last two 122" ARFs I just completed. Everything looks very clean so far.
To support this site, the reviews, and the photoshoots:
http://www.paypal.me/JoeHuntRC

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Pilot RC 40% Extra 330SC

Postby Joe Hunt » Tue Oct 20, 2015 8:45 pm

20151020_192614web.jpg
20151020_192626web.jpg
20151020_192629web.jpg
20151020_193340web.jpg
20151020_193343web.jpg
20151020_193351web.jpg
To support this site, the reviews, and the photoshoots:
http://www.paypal.me/JoeHuntRC

User avatar
Xpress
Posts: 22
Joined: Fri Aug 21, 2015 12:42 pm

Re: Pilot RC 40% Extra 330SC

Postby Xpress » Wed Oct 21, 2015 1:11 pm

You'll probably want to ditch the tank and wheels. Pilot goes above and beyond when it comes to completing their kits but the tank and wheels are not the strong points of the airplane. A Fiji bottle and PSP cap work much better! :D And don't forget the White Rose bling :P 8-)

For what it's worth, we never seal the hinge gaps and never have issues, though Tony does include spare sheets of covering if you want to either patch holes or seal the hinges. Very well thought out airplanes though ;)

You might have already deduced this yourself but keep in mind these are hucking airplanes, not really designed to fly fast or ultra precise. Great for down on the deck.
Team Hitec, Customer Service Representative

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Pilot RC 40% Extra 330SC

Postby Joe Hunt » Wed Oct 21, 2015 1:20 pm

Hi Xpress!

Xpress wrote:For what it's worth, we never seal the hinge gaps and never have issues


The issue is control surface authority... or as Cartman would say, uh-thor-uh-tie! Used to make a difference with flutter when all we had was weak servos. But, now it is just for better surface authority. And, it does make a nice difference for that. Try it and see!

I see what you mean about precision. The wings are pretty thick with round leading edges. Should be fun! I already have two precision planes! Doh! haha

You know, though, my old Carden's (I had four of those) had similar wings but were still pretty precise.
To support this site, the reviews, and the photoshoots:
http://www.paypal.me/JoeHuntRC

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Pilot RC 40% Extra 330SC

Postby Joe Hunt » Sun Oct 25, 2015 3:13 am

I always wanted to build a bigger rudder for my 122" H9 Sukhoi, I won't be needing to do that with the 122" Pilot Extra. 8-)


20151024_212035web.jpg
20151024_211945web.jpg
To support this site, the reviews, and the photoshoots:
http://www.paypal.me/JoeHuntRC

User avatar
Xpress
Posts: 22
Joined: Fri Aug 21, 2015 12:42 pm

Re: Pilot RC 40% Extra 330SC

Postby Xpress » Mon Oct 26, 2015 4:02 pm

As you can see with the size of the rudder... Authority is not a problem :cool:
Team Hitec, Customer Service Representative

User avatar
dunny
Posts: 4
Joined: Sun Oct 04, 2015 8:24 pm
Location: Dana Point, Ca

Re: Pilot RC 40% Extra 330SC

Postby dunny » Sun Nov 01, 2015 7:21 pm

Do you think the airframe is built for the long haul? I remember Dave Sullivan really honking on his when I lived and flew in Sacramento. It's too bad that so few people build GS kits nowadays- there are very few to choose from and I really think there is a lot to be learned from building. I know Joey, all most people want to do is fly ;-)

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Pilot RC 40% Extra 330SC

Postby Joe Hunt » Mon Nov 02, 2015 1:26 am

dunny wrote:Do you think the airframe is built for the long haul? I remember Dave Sullivan really honking on his when I lived and flew in Sacramento. It's too bad that so few people build GS kits nowadays- there are very few to choose from and I really think there is a lot to be learned from building. I know Joey, all most people want to do is fly ;-)


The fuse is just a little beefier than the Hangar 9 Sukhoi, but not nearly as beefy as the AW Yak55m. The wings are the heaviest of the three. Seems a good balance between weight and strength.

I'd like to build a kit, too. Probably a Dalton 300, not ML. Build it for fast and light freestyle. :)
To support this site, the reviews, and the photoshoots:
http://www.paypal.me/JoeHuntRC

User avatar
Xpress
Posts: 22
Joined: Fri Aug 21, 2015 12:42 pm

Re: Pilot RC 40% Extra 330SC

Postby Xpress » Wed Nov 04, 2015 8:23 am

dunny wrote:Do you think the airframe is built for the long haul? I remember Dave Sullivan really honking on his when I lived and flew in Sacramento. It's too bad that so few people build GS kits nowadays- there are very few to choose from and I really think there is a lot to be learned from building. I know Joey, all most people want to do is fly ;-)


They're pretty durable!! We've been beating the snot out of Pilot airplanes at my club for years. The only time they break is if someone augers one in.
Team Hitec, Customer Service Representative


Return to “Build Threads”

Who is online

Users browsing this forum: No registered users and 1 guest