Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Sun Oct 04, 2015 4:35 pm

Opinions? Experiences?

I'm thinking about running these:

20150916_032603web.jpg
To support this site, the reviews, and the photoshoots:

User avatar
Naughty Monkey
Posts: 112
Joined: Fri Aug 14, 2015 11:25 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Naughty Monkey » Sun Oct 04, 2015 9:30 pm

I have been running one and it has been great. The only hiccup I had was I didn't have it set up right in the radio. At first when I would turn off the ignition the led would sit and blink. I didn't have the end point all the way down for it to register off, so it was right at the on off point. I like the built in voltage regulator also.
Jared


User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Sun Oct 04, 2015 9:46 pm

So, could that happen the same way on the other end point? Where the engine might go on and off with the switch "on"? I read somewhere to make sure you go max end point... I'm still ignorant about this device. :)

And, where have you bean'? ;)
To support this site, the reviews, and the photoshoots:

User avatar
Naughty Monkey
Posts: 112
Joined: Fri Aug 14, 2015 11:25 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Naughty Monkey » Thu Oct 08, 2015 9:46 am

I'm sure it could do that. The switch is based on the signal output of the channel it is plugged into. I didn't have my endpoint all the way to -150. Funny thing is the problem didn't show up (or didn't notice it more likely) until i had 10 or 15 flights with it.
Jared


User avatar
Naughty Monkey
Posts: 112
Joined: Fri Aug 14, 2015 11:25 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Naughty Monkey » Thu Oct 08, 2015 9:48 am

Bean busy and in a bit of a funk lately. Hate it when i lose my mojo.
Jared


User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Thu Oct 08, 2015 12:34 pm

To support this site, the reviews, and the photoshoots:

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Sat Oct 10, 2015 9:57 pm

To support this site, the reviews, and the photoshoots:

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Sat Oct 10, 2015 10:01 pm

What I'm also wondering about is Tech-Aero's recommendation of failsafe engine off. One I'm not sure if the engine goes off with any small glitch or a prolonged loss of signal? And, two if it goes off with a small glitch I'm not sure I would like that in a harrier roll. ;) So, trying to decided Failsafe, or not Failsafe. I've always had this trouble with Failsafe... I've always kinda thought of it like running for a doorway in an Earthquake... basically survival in this disastrous situations is going to come down to luck, imo. Through the years the idea that I took time to set something up that might make things worse kinda has always annoyed me. haha
To support this site, the reviews, and the photoshoots:

User avatar
Joe Hunt
Site Admin
Posts: 392
Joined: Tue Aug 11, 2015 4:21 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Joe Hunt » Sun Oct 11, 2015 1:28 am

So, I removed my ignition battery and ignition switch... and replaced them with this filter and LED. Dropped 3oz in the process and... for me... have an easier charging situation. Charging was the main reason I got one of these IBEC units. Using this unit with the brushless servos and all I have to do it swap out two packs every 15-20 flights. Giving me 15-20 flights of time to charge up the first two packs. Very easy and convenient, as I see it.

20151011_005934web2.jpg
20151011_005923web.jpg


BTW, that fuel dot I got from Aeroworks... it's the easiest fuel dot to use I've ever had, I'm very happy with it. The Vent Dot that Aeroworks sells is working out great too.
To support this site, the reviews, and the photoshoots:

User avatar
Terryscustom
Posts: 14
Joined: Mon Aug 17, 2015 9:59 pm

Re: Tech-Aero Designs Ultra IBEC Ignition Battery Eliminator

Postby Terryscustom » Sun Oct 11, 2015 9:20 pm

I use these in all my planes, LOVE them!! :D
flypau.com
mksservousa.com
zdzusa.com


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest